Alpha PSC-150 Pneumatic Stone Cutter 6"

Alpha® is excited to introduce a new industrial quality pneumatic stone cutter, called the PSC-150, which is equipped with a 2 hp motor, with a speed governor in the motor that regulates the air consumption according to the torque needed for the application. This regulation includes producing enough torque to cut 1-1/4” (3cm) stone slabs in one pass. The PSC-150 offers kink-free water and air hoses to improve the maneuverability of the stone cutter. To ensure a long maintenance interval, we also recommend using the manifold system that comes with a regulator and filter to catch the debris and moisture delivered by compressed air. 

Features 

• 2 HP Pneumatic powered motor with speed control governor 

• Capable of miter cutting 1-¼” (3cm) material with ease 

• Kink-free water and air hoses for easy maneuverability and reducing operator fatigue 

• Great for sink-hole cutting, groove cutting, and rodding applications 

• 2,000 hour duty cycle 

• Comes with an eclipse II 6” Blade and a bottle of rust inhibitor oil 

• Recommended for: Granite/Eng. Stone 

• Alpha PSC-150 is a pneumatic powered motor, you can save the repair and maintenance costs of electric stonecutters when sink-hole cutting and groove-cutting for rodding applications. 

• Alpha® offers a carriage that retrofits on the Alpha® Guide Rail System to support the application of making precise miter cuts for the perfect lamination.

• It can utilize a variety of consumables including the Alpha® Katana 6” for porcelain panels and slabs, Hot-Rod 4” for 1/4” steel rods and 1/8” fiber glass rods. For marble applications, a Libero 5” blade is recommended since most marble slabs are 3/4” (2cm) thick or less.

Specifications 

• Air Pressure: 90 PSO (6.2 bar) 

• Air Consumption Min: 929 l/min 32 CFM / 1 HP* 

• Air Consumption Max: 48 CFM / 2HP 

• No Load Speed: 8,500 RPM 

• Air Inlet: ⅜” NPSM 

• Water Inlet: ¼” BSPP 

• Arbor: ⅞” (22.23mm) 

• Max. HP: 2.0 HP 

• Cutting Disc Diameter: 6” (150mm) 

• Weight: 10.3 lbs. 

• Can be used wet or dry 

• Equipment included: 

  • (3) Flanges 

  • (2) Bolts (M6X20 Left) / (M6x20 Left) 

  • (1) Side Handle 

  • (1) Combination Wrench (9mm) 

  • (1) Open End Spanner Wrench (22mm) 

  • (1) Air Hose (15ft / 4.5m) 

  • (1) Water Hose (15ft / 4.5m) 

  • (1) Rust Inhibitor Oil (8oz / 237 ml) (AIR-008) 

  • (1) Alpha Eclipse II 6” Blade (DEE006) 

  • (2) Muffler 

  • (1) Reduced Flow Air Inlet Fitting (3001-0084) 

  • (2) Hook & Loop Strap