Donkey 5" Inline 3-Step Polishing Pad

Weha Hook & Loop backed edge wheels are built and designed specifically for horizontal machines such as Comandulli machines, Montresor edge polishers as well as vertical polishing machines: Sasso Flying Flat, Park Industries FastBack, GMM Tower, Marmo 711, and other polishing machines. Designed to accommodate between 5-9 heads, the Weha inline polishing combo system will create a fantastic polish on marble, granite, dark quartz, light quartz, quartzite, porcelain, ceramic, sintered stone, etc.

Features & Specifications 

• The Weha inline polishing wheels are hook & loop backed for quick replacement without the hassle of removing the snail lock holders.

• The Step 0 is not needed under normal circumstances. Only use #0 if the edge is not flat or extremely rough and needs some stock removal before step 1.

• This Weha combo system took several months of R & D and has been tested on 5 head vertical machines as well on up to 8 head horizontal machines.

• The combination of the 3 Step and Donkey pads is producing an excellent polish on all materials with all machines.

• The Step 1,2,3 will be used together in sequence.

• For 5 head machines:

• Step 1,2,3, Donkey Pad 1000,2000 or 2000,3000 depending on the stone and how much gloss you need to match.

• Typical quartz use 1,2,3, Donkey Pad 1000,2000

• For greater texture use Step 1,2,3 Donkey pad 600,1000

• For 6 or more head machines the sequence can be the same as the 5 head sequence. You may add the 3000 grit Donkey for the occasional very difficult granite.

• Machine Specs:

• Step 1: 3 Bar

• Step 2-6: 2.5 Bar

• Feed Rate: 80-120cm per minute depending on machine