Weha Vacuum Brazed Dry Magic 1/4" (6mm) and Weha Vacuum Brazed Dry Magic 1/2" (12mm) Hex Head Non Core Drill Bits for Ceramic, Porcelain, Granite, Marble, Engineered Stone, Quartz, Landscape Stone, all natural Stones

Weha Dry Magic Vacuum Brazed Hex Head Non Core Bits are made to drill in ceramic, porcelain, granite, marble, quartz, and all natural and engineered stones.

These vacuum brazed drill bits are made to be used on Cordless and Electric Drills. The shaft is hexagon shaped to fit all cordless and electric drills. This keeps the diamond drill bit from spinning while drilling.

Features 

• The Dry Magic Hex Head Core Bits can be used wet or dry and can be run from 700-6,000 rpm.

• Weha's patented Vacuum Brazed II technology allows the diamonds to drill faster and last longer than other vacuum brazed core bits.

• Weha Dry magic dry diamond core bits can all be used wet

• The Dry magic core drill bits will leave ceramic, porcelain, granite, marble, and all stone with a clean, chip free hole without any chips or blowouts around the hole.

• The Dry Magic Hex Head Non Core Bit will drill a hole without leaving a core. This is great for setting anchors, clips, screws, etc with polyesters and epoxy glues 

Specifications

• ¼” 

• Total Length: 3 1/8" (80mm)

• Hex Shaft: 1 1/2" (40mm)

• ½” 

• Total Length: 3 1/8" (80mm)

• Hex Shaft: 1 1/2" (40mm)

Weha Dry Magic 3/4"-20mmVacuum Brazed Dry Diamond Core Bit for Ceramics, Porcelain, Marble, Granite, Stone, Dekton, Lapitec

Weha 3/4" 35mm Dry Magic Vacuum Brazed Core Bit is a Porcelain Core Bit, Ceramic Core Bit, Marble Core Bit, and Granite Core Bits all in one.

The best vacuum brazed Dekton Core Bit because it can be used wet or dry, minimal chipping, and no cracking of the Dekton. Also, one of the best marble core bits for similar reasons. Virtually no chipping, minimal blowout on the bottom, fast drilling, and great life.

Features 

• Weha 3/4" Vacuum Brazed Diamond Core Drill Bit drills cleanly dry with zero chipping.

• The Weha Dry Magic Vacuum Brazed Core Bits are made to run between 3,000-11,000 rpm in all types of ceramic, porcelain, marble, granite.

• The vacuum brazing is on both the inside and outside of the barrel, as well two 2 1/2" vacuum brazing up the outside barrel for full drilling depth.

• This special Vacuum II Brazed diamond technology allows an uncomplicated, hands-free and clean drilling on angle grinders. The Vacuum diamond coating allows fast drilling with extremely clean, chip free holes.

• The Weha Vacuum Brazed Core Bits are designed to drill hard and brittle materials such as ceramics, porcelain, marble, granite, stone materials. Also materials such as stoneware, glazed clinker and hard roof tiles can also be drilled.

• Weha Dry Magic Vacuum Brazed Core Bits allow drilling depth of 2 1/2" (60mm) with total length of 3 1/2" (90mm).

Specifications

• 3 1/2" (90mm) total length

• 2 1/2" (60mm) drilling depth

• Dry use

• May be used wet

• Recommended RPM: 3,000-11,000 rpm

• 5/8-11 thread

• Drilling materials: Dekton, Lapitec, Porcelain, Ceramic, Marble, Granite, Stone, and Tile 

Weha Dry Magic 1" (25mm) Vacuum Brazed Dry Diamond Core Bit for Ceramics, Porcelain, Marble, Granite, Stone

Weha 1" 25mm Dry Magic Vacuum Brazed Core Bit is a Porcelain Core Bit, Ceramic Core Bit, Marble Core Bit, and Granite Core Bits all in one. Weha 1" Vacuum Brazed Diamond Core Drill Bit drills cleanly dry with zero chipping.

Features 

• The Weha Dry Magic Vacuum Brazed Core Bits are made to run between 3,000-11,000 rpm in all types of ceramic, porcelain, marble, granite.

• The vacuum brazing is on both the inside and outside of the barrel, as well two 2 1/2" vacuum brazing up the outside barrel for full drilling depth.

• This special Vacuum II Brazed diamond technology allows an uncomplicated, hands-free and clean drilling on angle grinders. The Vacuum diamond coating allows fast drilling with extremely clean, chip free holes.

• The Weha Vacuum Brazed Core Bits are designed to drill hard and brittle materials such as ceramics, porcelain, marble, granite, stone materials. Also materials such as stoneware, glazed clinker and hard roof tiles can also be drilled.

• Weha Dry Magic Vacuum Brazed Core Bits allow drilling depth of 2 1/2" (60mm) with total length of 3 1/2" (90mm).

Specifications

• 3 1/2" (90mm) total length

• 2 1/2" (60mm) drilling depth

• Dry use

• May be used wet

• Recommended RPM: 3,000-11,000 rpm

• 5/8-11 thread

• Drilling materials: Porcelain, Ceramic, Marble, Granite, Stone, and Tile 

Weha Dry Magic 1 1/4" 32mmVacuum Brazed Dry Diamond Core Bit for Ceramics, Porcelain, Marble, Granite, Stone, Dekton, Lapitec

Weha 1 1/4" 32mm Dry Magic Vacuum Brazed Core Bit is a Porcelain Core Bit, Ceramic Core Bit, Marble Core Bit, and Granite Core Bits all in one. The best vacuum brazed Dekton Core Bit because it can be used wet or dry, minimal chipping, and no cracking of the Dekton. Also, one of the best marble core bits for similar reasons. Virtually no chipping, minimal blowout on the bottom, fast drilling, and great life.

Features 

• Weha 1 1/4" Vacuum Brazed Diamond Core Drill Bit drills cleanly dry with zero chipping.

• The Weha Dry Magic Vacuum Brazed Core Bits are made to run between 3,000-11,000 rpm in all types of ceramic, porcelain, marble, granite.

• The vacuum brazing is on both the inside and outside of the barrel, as well two 2 1/2" vacuum brazing up the outside barrel for full drilling depth.

• This special Vacuum II Brazed diamond technology allows an uncomplicated, hands-free and clean drilling on angle grinders. The Vacuum diamond coating allows fast drilling with extremely clean, chip free holes.

• The Weha Vacuum Brazed Core Bits are designed to drill hard and brittle m aterials such as ceramics, porcelain, marble, granite, stone materials. Also materials such as stoneware, glazed clinker and hard roof tiles can also be drilled.

• Weha Dry Magic Vacuum Brazed Core Bits allow drilling depth of 2 1/2" (60mm) with total length of 3 1/2" (90mm).

Specifications 

• 3 1/2" (90mm) total length

• 2 1/2" (60mm) drilling depth

• Dry use

• May be used wet

• Recommended RPM: 3,000-11,000 rpm

• 5/8-11 thread

• Drilling materials:  Dekton, Lapitec, Porcelain, Ceramic, Marble, Granite, Stone, and Tile 

Weha Dry Magic 1 3/8" 35mm Core Bit

Features & Specifications 

The Dry Magic Vacuum Brazed dry core bits are a great choice for core drilling a variety of materials including:

• Granite

• Marble

• Dekton

• Lapitec

• Sintered Stone

Weha Dry Magic 2" 50mmVacuum Brazed Dry Diamond Core Bit for Ceramics, Porcelain, Marble, Granite, Stone, Dekton, Lapitec

Weha 2" 50mm Dry Magic Vacuum Brazed Core Bit is a Porcelain Core Bit, Ceramic Core Bit, Marble Core Bit, and Granite Core Bits all in one. The best vacuum brazed Dekton Core Bit because it can be used wet or dry, minimal chipping, and no cracking of the Dekton. Also, one of the best marble core bits for similar reasons. Virtually no chipping, minimal blowout on the bottom, fast drilling, and great life.

Features 

• Weha 2" Vacuum Brazed Diamond Core Drill Bit drills cleanly dry with zero chipping.

• The Weha Dry Magic Vacuum Brazed Core Bits are made to run between 3,000-11,000 rpm in all types of ceramic, porcelain, marble, granite.

• The vacuum brazing is on both the inside and outside of the barrel, as well two 2 1/2" vacuum brazing up the outside barrel for full drilling depth.

• This special Vacuum II Brazed diamond technology allows an uncomplicated, hands-free and clean drilling on angle grinders. The Vacuum diamond coating allows fast drilling with extremely clean, chip free holes.

• The Weha Vacuum Brazed Core Bits are designed to drill hard and brittle m aterials such as ceramics, porcelain, marble, granite, stone materials. Also materials such as stoneware, glazed clinker and hard roof tiles can also be drilled.

• Weha Dry Magic Vacuum Brazed Core Bits allow drilling depth of 2 1/2" (60mm) with total length of 3 1/2" (90mm).

Specifications 

• 3 1/2" (90mm) total length

• 2 1/2" (60mm) drilling depth

• Dry use

• May be used wet

• Recommended RPM: 3,000-11,000 rpm

• 5/8-11 thread

• Drilling materials: Dekton, Lapitec, Porcelain, Ceramic, Marble, Granite, Stone, and Tile